Mounting Hole and Overall Dimensions of the TorkLift GlowStep Stow N Go Mounting Bracket

Question

Question:

Looking for the dimensions of the mounting plate. I saw the prior posts of dimensions total height and width. Wanted to check the height of the mounting plate specifically as I have limited space below my door on a Palomino SS 1240. Thank you in advance.

asked by: Christian G

0

Expert Reply:

The TorkLift GlowStep Stow N' Go Mounting Bracket for Truck Bed Campers # TLA7810 measures 2-1/2" from the bottom mounting hole to the top mounting hole, and 19-1/2" across the two mounting holes. This bracket also has overall measurements of 23" wide and 7-1/2" tall.

expert reply by: Bryce D

0

Mounting Hole Measurements
(click to enlarge)

Overall Measurements
(click to enlarge)

Answer 1

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

view full answer...

Answer 2

While we do not carry that particular Lippert step we do have the similar MORryde #MR98RR or a better option in my opinion is the TorkLift GlowStep #TLA9104. I prefer this step as it folds up nicely and works better in tight areas like storage lots.…

view full answer...

Answer 3

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 4

Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TL52SR will work perfect for your coach. These steps…

view full answer...

Answer 5

For a 29.5" doorway with a 36.5" stair height I recommend the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 4 Steps item #MR28RR. These steps are for entryways with a doorway width (from inside flange to inside…

view full answer...

Answer 6

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

view full answer...

Answer 7

Hey Dave, the MORryde upgraded shackle kit part #MR76ZR that you referenced is compatible with your 2020 Grand Design 2670MK and the Lippert Road Armor equalizers.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Are you basically asking how much length would this coupler add to the tongue of your trailer?

view full answer...

Answer 10

The SolidStep Manual Fold-Down Steps are a great choice for your Jayco 5th Wheel Camper. The amount of steps needed depends on your entry way height from the ground. The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames…

view full answer...

Answer 11

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Mounting Hole and Overall Dimensions of the TorkLift GlowStep Stow N Go Mounting Bracket

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching