Rhino-Rack Crossbars & Feet For Elevate T-Slot Rails

Question

Question:

I have elevate rack system T slot rails on my 2019 Ford F150 5.5 ft bed. I was told you guys sold rhino feet and bars that will mount in them and quick release out? Bars need to be roughly 66 inches center of t slot to center. Can you tell me what feet and bars I need please?

asked by: Mark R

0

Expert Reply:

We do have a Rhino-Rack set up for the Elevate t-slot rails, and there are two options, one with 65 inch bars and one with 71 inch bars; both of the following come with the feet as well as the crossbars so it's all you'll need.

- 65 Inches: Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers # RRVA165B-RRRLT600

- 71 Inches: Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers # RRVA180B-RRRLT600

I believe the 65 inch bars will be perfect, but wanted to give you the option of the longer bars as well if you want to go that route.

expert reply by: Kyle S

0

Answer 1

Yes, the Yakima BedRock HD Truck Bed Rack item #Y01160-58 is the complete set but it is just a set of crossbars that go over the bed of your 2023 Nissan Frontier. These attach directly to your bed sides with included adjustable locking clamps. They…

view full answer...

Answer 2

The correct size crossbar to use on the bed of your 2018 Ford F-150 with the PowertraxONE XR Hard Tonneau Cover w/ Trax Rails part #RTT-70373 is 71" which means the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M…

view full answer...

Answer 3

I was able to confirm through my contact at Retrax that the T-channels on your 2019 Ford Raptor OEM tonneau Cover, model number VJL3Z84501A42A, share the same dimensions as the T-channels on the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails…

view full answer...

Answer 4

The RetraxONE XR #RTT-60373 and the Rhino Rack #RRVA165B-RRRLT600 crossbars and a carrier like the Thule Stacker, part #TH830 could be used for the purpose you described, but because the kayaks you'll be carrying are twice as long as the truck…

view full answer...

Answer 5

For your 2023 Ford F-150 that has a Retrax PRO XR tonneau I would go with the 71 inch long crossbar rack part number #RRVA180B-RRRLT600 as that puts the bars right over the top of the bed rails. Thule doesn't offer crossbars longer than 60 inches…

view full answer...

Answer 6

Yakima offers a great solution that is compatible with the rails provided by your RetraxONE XR tonneau cover. The rack would assemble using the following parts: • Yakima 70 inch wide CoreBar crossbars, part #Y00423 • Yakima SkyLine Towers, part…

view full answer...

Answer 7

For a set of crossbars and the feet that will attach them to your Retrax XR on your 2022 Ford F-350, you can use the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers #RRVA180B-RRRLT600. According to Retrax, this will fit any of…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...