71 or 65 inch Long Rhino Rack Crossbar Kit for 2023 Ford F-150 with Retrax PRO XR Tonneau  

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain…

I was able to go out to our demonstration bay and test fit the Rhino-Rack Vortex Aero Crossbars #RR37GR with some of the Thule roof bike racks and ski racks for you. I found that the racks like the #TH95JV and #TH7326 are compatible with the Rhino…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

The RetraxONE XR Hard Tonneau Cover w/ Trax Rails part #RTT-60311 is 62-3/8" wide at both the cab and tailgate measuring from inside the rails. The rails are both 3" wide so if you wanted the overall width from outside edge to…

There is not a minimum safe distance between the crossbars of the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. You'll just set the distance between the bars for whatever is appropriate…

Rhino Rack actually has a kit designed specifically for fitting the tracks of a RetraxPro XR ladder rack with the part number #RRVA180B-RRRLT600. This kit includes the feet you mentioned #RRRLT600 which fits the tonneau.

Yes, the Yakima DeepSpace 10 Rooftop Cargo Box #Y65RR will mount on generic round bars as long as your cross bar spread is between 32" - 46". The #Y65RR works with round, square, elliptical, and most factory crossbars. If you have…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the…

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline…

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…