Replacement Start Capacitor For Furrion Chill 14.5K

Question

Question:

I have a 14.5k Furrion Chill AC installed and need to replace the capacitor however the one in the unit is a 60+15+8 which is the one for the 15k unit. Can I assume replacing with the like item won’t be a problem?

asked by: Erik R

0

Expert Reply:

If you've had the 60+15+8 start capacitor installed in your Furrion 14.5K Chill and it worked fine then I don't see why you couldn't replace the capacitor with the same thing.

However the 14.5K should have come with a 50+15+8 # FR45FR, so it's what I'd recommend as it's what was designed to be installed.

expert reply by: Samuel C

0

Answer 1

The start capacitor #FR45FR is designed to store energy that will allow you to start your AC unit when there is not enough power available otherwise; I suppose it's similar to a soft start like you've referred to. Whether or not you can run 2…

view full answer...

Answer 2

Your question asked if 30-amp service would run two 14,500 BTU air conditioners, but you referenced Furrion #FR67FJ air conditioners which are 15,500 BTU's each.The 15.5K units draw 15.4 amps each when running - so that will not work. The Furrion…

view full answer...

Answer 3

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like the #FR58PR that you referenced.

view full answer...

Answer 4

Furrion has a replacement start capacitor that works with the 15.5k Furrion Chill units with the part #FR65FR. THe part #FR45FR only works on the lighter duty 14.5k units.

view full answer...

Answer 5

The SoftStartRV Soft Start for RV AC Units #SSR54FR is designed to work with single-phase air conditioner units. If you remove the shroud there's a tag on the compressor that should state if your unit is single-phase or three-phase. If you have…

view full answer...

Answer 6

The Furrion Chill FACR14SA-BL does already come with a start capacitor built-in. So you would not want to add the SoftStartRV Soft Start for Single Zone Air Conditioner Setup #SSR54FR. If the start capacitor on your Furrion Chill FACR14SA-BL has gone…

view full answer...

Answer 7

The D&W Inc Quick Connect Hose Nozzle Adapter for Spray-Away Hose Item #PF247007 should do the job for you. We also have the entire hose as #PF267003 that will plug into the Replacement Dual Handle Faucet for D&W Inc Spray-Away Unit -…

view full answer...

Answer 8

We do not have an all-metal version of the Replacement Dual Handle Faucet #PF213790 that you referenced but it is a tough faucet. The types of hoses people use with these are stretchable ones like the part #PF267003 which as long as you aren't…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Replacement Start Capacitor For Furrion Chill 14.5K

Product Page this Question was Asked From

Continue Researching