Recommended 4-Way Flat Connector For a 2022 Honda CR-V Hybrid

Question

Question:

If I want to add a 4 pin flat trailer connector to a 2022 Honda CRV Hybrid, what would you recommend?

asked by: Troy

0

Expert Reply:

I recommend the T-One Vehicle Wiring Harness # 118741 for your 2022 Honda CR-V Hybrid. This will give you a 4-way flat connector. In my experience the Tekonsha modules have less issues than other manufacturers.

expert reply by: Bud M

0

Answer 1

You are correct that for your 2021 Honda CR-V there are a few different trailer hitch receiver options. Between them the most popular are the Curt #C13397, Draw-Tite #DT79MR, and the etrailer #e98848. These three hitches have quite a bit in common…

view full answer...

Answer 2

We do have a couple of trailer hitch receiver that fit your 2021 Honda CR-V (non-hybrid), which I confirmed with the manufacturers for you. The options you can choose from are from Curt or Draw-Tite: - Curt Trailer Hitch Receiver #C13397 -…

view full answer...

Answer 3

From what I could find, it does look like all trim levels on the 2019 Honda CR-V are limited to 1,500 pounds towing. This can be verified by checking the driver side door jamb. There is a sticker with all capacities the vehicle is rated to. The…

view full answer...

Answer 4

The best trailer hitch receiver for your 2021 Honda CR-V (which fits all models, including your Sport), is the following: - Draw-Tite Trailer Hitch Receiver #DT79MR There's a couple of reasons for that, starting with the fact it has excellent…

view full answer...

Answer 5

The Tekonsha harness part #118741 that you referenced is a fit for the AWD and FWD versions of the 2018 Honda CR-V. I attached a link to an install video for this kit on a 2018 CR-V for you to check out as well.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Recommended 4-Way Flat Connector For a 2022 Honda CR-V Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching