15 Amp to 30 Amp Adapter for Powering RV with House Wall Outlet

Question

Question:

Hello, I have a Coleman Sedona 2011 pop up. Its rated 110-125 volt AC, 60Hz, 30 ampere service. Im looking for an adaptor to plug into the camper line so I can plug it into a house outlet to charge, run refrigerator etc. Do you have an adaptor that will work? Thank you

asked by: Joshua S

0

Expert Reply:

We have the Mighty Cord 30 amp to 15 amp adapter part # A10-1530DAVP which will plugs into your your house wall outlet and gives you a 30 amp socket for your RV power cord to connect to.

expert reply by: Jameson C

0

Answer 1

Yes, you will be able to connect the Camco Power Grip RV Power Cord Adapter #CAM55175 into the Camco RV Power Defender Voltage Protector #CAM55301. This will allow you to still protect your 30 amp camper from over/under voltage while connecting to…

view full answer...

Answer 2

It sounds ord like you're looking for an adapter or cord that has a standard household 15-amp male connector on one end and a 30-amp female on the other. Standard household male plugs as found on extension cords are rated for 15-amp service.…

view full answer...

Answer 3

Sounds like you are looking for the Power Grip RV Power Cord Adapter #CAM55155. This has a 15 Amp Female to 30 Amp Male. This adapter or "dogbone" works on 125V service. With this, you can connect your 15 amp refrigerator to a 30…

view full answer...

Answer 4

If your electrical distribution system is not rated for 30 amps you should not be trying to plug into a 30 amp RV power pedestal at a camp site. From the attached images you are correct, you obviously have a 20 amp plug as it is clearly labeled for…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

15 Amp to 30 Amp Adapter for Powering RV with House Wall Outlet

Product Page this Question was Asked From

Continue Researching