Is The Lomax Tonneau Cover Compatible With Truxedo Elevate Ladder Rack On 2021 Ram 1500 5-1/2' Bed?

Question

Question:

Is the Lomax folding cover LOM28QR compatible with the Elevate rack system on a 2021 Ram 1500 w/o Ram box?

asked by: Kirk

1

Helpful Expert Reply:

To use the Lomax Hard Tonneau Cover # LOM28QR you will want to combine this with the Adarac Pro Series Custom Truck Bed Ladder Rack # A35WG on your 2021 Ram 1500 5-1/2' short bed. The TruXedo Elevate Truck Bed Rack System # TX96NV is not confirmed to fit with the Lomax covers. We do have the similar BAKFlip G2 Hard Tonneau Cover # BAK226227 you can use with the Truxedo Elevate if you prefer that ladder rack.

expert reply by: Bud M

1

Answer 1

Without knowing which exact model of Lomax tri-fold tonneau cover you have installed on your 2021 Ram 1500, the main determining factor that allows for you to install a ladder rack is if the tonneau cover leaves the stake pockets completely open on…

view full answer...

Answer 2

I checked with the manufacturer, Adarac, and verified that for your 2022 Ram 1500, the crossbars of the Adarac Pro Series rack are 24 inches above your bed rails. And regarding the difference between the two, it is simply the size of the bed they fit…

view full answer...

Answer 3

The TS Rails for Truck Hero Elevate Rack System part #TH65FR is designed to fit along side of the Extang Xceed Hard Tonneau Cover part #EX47FR bed rails. Your original rails will still be in place and will continue to act as the weather barrier for…

view full answer...

Answer 4

That one won't let you open a folding tonneau cover all the way but I have a ladder rack that I can guarantee will. It is the Adarac Pro Series Custom Truck Bed Ladder Rack item #A42WG in black or item #A49FR with an aluminum finish. This ladder…

view full answer...

Answer 5

The best way to prevent contact between your canoe and the roof of your 2022 Ram 1500 is by using a rack with a cantilever over the roof. The Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43003XT-501EX includes a cantilever which adds 32" of…

view full answer...

Answer 6

I have the perfect solution for you with the TruXedo Elevate Truck Bed Rack System #TX46NV. It's compatible with your BAKFlip MX4 tonneau cover and the towers adjust to either 18" or 28" tall. It has multiple mounting points for the…

view full answer...

Answer 7

For your 2020 Toyota Tundra with Weather Tech cover, you can use the TruXedo Elevate Truck Bed Rack System #TX46NV. I contacted the manufacturer and they confirmed that the TruXedo Elevate Truck Bed Rack System #TX46NV is compatible with your truck…

view full answer...

Answer 8

The Yakima OverHaul HD, part #Y01151-5868, that is compatible with your 2021 Toyota Tundra with the deck rail system, is compatible with some tonneau covers. The BAK tonneau covers are not compatible with these ladder racks. Instead, I recommend…

view full answer...

Answer 9

You're correct that you'll need to use a stake pocket mounted ladder rack to fit a ladder rack in with your tonneau cover, but you'll need to ensure that your tonneau cover sits inside the bedrails with very limited overlap so that the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...