Solution for Replacement Hubs Using Obsolete 2585 Inner and 1380 Outer Bearing Combination
Question:
looking for new hubs to reaplace the old style ones inner bearing is a 2585 and outer is 1380 thanks
asked by: Matthew G
Expert Reply:
It looks like that bearing combination was used on 1940's and 1950's trailers. Unfortunately, it is now obsolete with no hubs available. Your best bet would be to replace the axle with spindles using a modern bearing combination.
In order to find the right replacement axle you will need to know the axle capacity as well as the length of the axle. The length is the hub face to hub face measurement as shown in the diagram below. For example, if your axle measured 95" and had a 3,500 lb capacity you could use the # e68GR. Then you could choose replacement hubs with the bolt pattern that match what you have now.
I have attached a link to all of our replacement axles which can be filtered by length and capacity for your reference.
Products Referenced in This Question
Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 2585
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.313 Inch I.D.
- Bearing 2585
- Race 2520
- 9000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Video: Trailer Axle Replacement
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Article: How to Measure a Trailer Axle
- Q&A: Bearings, Races and Grease Seals for a 1960 Camper Axle
- Q&A: Replacement Fender Recommendation for Boston Whaler Boat Trailer
- Q&A: 95" Long Axle With 80" Spring Center With Electric Trailer Brakes and a 5 on 4-3/4" Bolt Pattern
- Q&A: Compatibility of Boat Trailer with Boston Whaler Sport
- Search Results: boat trailer axle
- Search Results: trailer axle
- Search Results: trailer axles
- Search Results: 3500 lb axle
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: axle
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: bearing buddy
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 25580