Brake Pads With Stainless Steel Back Plate For DeeMaxx Disc Brake Kit DBSO-6K-MAXX

Question

Question:

Do you. Have SS backed pads for DBSO-6K-MAXX 6000 pound system how much are they …thanks

asked by: David B

1

Helpful Expert Reply:

You will need the DeeMaxx Ceramic Brake Pads with Stainless Steel Back Plates # DE98VR to fit the DeeMaxx Disc Brake Kit DBSO-6K-MAXX # DE82FR. We also have the Stainless Steel Caliper # DE58VR if you want to upgrade your caliper.

expert reply by: Bud M

1

Answer 1

Yes, the Kodiak Disc Brake Kit item #K2HR35DS. Those are 10" Hub/Rotor with a 5 on 4-1/2 bolt pattern that will fit 14"-15" wheels. The hubs are corrosion resistant with a dacromet plating. They are sold in pairs so you…

view full answer...

Answer 2

Yes, you are correct the Kodiak Ceramic Brake Pads with Stainless Steel Backing Plate #K225CPSS will fit your Kodiak Disc Brake Caliper Model 225. For Ceramic Brake Pads without the stainless steel backing plate you will want #K225CP for your model…

view full answer...

Answer 3

From my research it appears MasterCraft specifies Kodiak disc brakes on their tandem boat trailers so you'll just want to confirm the axle rating. Then just review the linked page that displays all Kodiak replacement pads like the part…

view full answer...

Answer 4

The DeeMaxx Disc Brake Kit #DE82FR has the bolts and all other parts necessary to replace the Kodiak #K2R526DKG on your trailer. The bolts are already in place in the pictures for the DeeMaxx, unlike the Kodiak where we have them sitting out…

view full answer...

Answer 5

The DeeMaxx Disc Brake Kit #DE82FR comes with 2 Slip-on rotors, calipers and brackets for one axle. The slip on rotors are for a 6 on 5-1/2" idler hubs and the mounting brackets fit on a 5 bolt brake flange.

view full answer...

Answer 6

We have received reviews that the DeeMaxx Disc Brake Caliper #DE86VR worked as a replacement for the brake calipers on a Tiedown disc brake setup. Do understand we have not tested them for fitment or can guarantee fitment for every Tiedown disc…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 9

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 10

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Brake Pads With Stainless Steel Back Plate For DeeMaxx Disc Brake Kit DBSO-6K-MAXX

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching