Difference Between MaxxFan Deluxe Vents MA00-06401K & MA00-06200K

Question

Question:

Can you tell me the difference between the maxx air 06200k and the 6401k

asked by: Judi

1

Helpful Expert Reply:

Sure thing; the MaxxFan Deluxe Roof Vent # MA00-06401K has only four speeds and does not have a thermostat so you have to manually set the air speed. The MaxxFan Deluxe Roof Vent # MA00-06200K has 10 speeds and includes a thermostat which will automatically turn the vent on and off based on the temperature, so it's a lot more convenient.

expert reply by: Kyle S

1

Answer 1

For your AL-KO 7210 braking assembly, you can use the Hydraulic Brake Kit #AKFBBRK-7 as a replacement. These braking assemblies measure 12" x 2", bolts onto a 5 bolt mounting flange, will work with wheel sizes from 14-1/2" to…

view full answer...

Answer 2

The Kodiak Oil Cap #KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230. This will replace the oil cap on your trailer axles…

view full answer...

Answer 3

The best option for a Class C motorhome windsheild cover is going to be the Adco Deluxe Cover part #290-2507 which is designed for Class C motorhomes just like yours. I attached a review video for this cover for you to check out as well.

view full answer...

Answer 4

Yes most of the T@G campers I have seen use the Yakima 54" Tracks for Roof Racks part #Y01127 base tracks. You can get evrything you need in one kit with the Yakima HardTop SL Roof Rack - 60" CoreBar Crossbars - 54" Tracks part #Y01618…

view full answer...

Answer 5

To drop the front of the pin box and thus lower the front of the fifth wheel, you'd need to RAISE the pin box, not lower it. Lowering the pin box would raise the height of the fifth wheel at the front. If you have an available set of holes at the…

view full answer...

Answer 6

If you have more of the weight in the trailer on the left side then that could explain the uneven wear. Axles have a bow or camber in the middle. When weight is in the trailer it straightens out the axle some and the tires should wear evenly. When…

view full answer...

Answer 7

I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest…

view full answer...

Answer 8

There are and were numerous 2-step Kwikee electric steps available. To ensure we get you the correct replacement I would need to know the series of the steps you have. Check the underside of your steps for any model numbers or other information. The…

view full answer...

Answer 9

There isn't going to be any noticeable difference in the fit between the Draw-Tite Trailer Hitch #75549 and Curt Trailer Hitch #C13388 that fit your 2019 Mercedes-Benz Sprinter 2500 with a 170 inch wheelbase and standard bumper. The reason for…

view full answer...

Answer 10

The Dexter E-Z Flex Suspension Kit part #K71-653-00 will work just fine on 3,500 axles assuming the measurements match up which in your case they do. I have spoken to Dexter about this before and the weight capacity listed is more or less a guide to…

view full answer...

Difference Between MaxxFan Deluxe Vents MA00-06401K & MA00-06200K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching