Complete Rebuild Kit for Roadmaster Falcon 2 Tow Bar

Question

Question:

Im looking for a complete rebuild kit for a Roadmaster Falcon2, RV hitch #043038. Will your kit # RM910003-55 work, or is their a different kit? Thanks

asked by: Martin G

0

Expert Reply:

Since you have a Falcon 2 tow bar the correct rebuild kit you'd need is the part # RM-910003-60 actually. The part number you mentioned is for the All Terrain model.

expert reply by: Jameson C

0

Answer 1

For the 2022 Chevy Equinox we have the Blue Ox base plate kit part #BX1730 which is a confirmed fit and would work great. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to…

view full answer...

Answer 2

After speaking to my contact at Roadmaster, I have found the arms and the locking mechanisms on the Roadmaster Falcon All Terrain Tow Bar #RM-522 you referenced are both replaceable and sold separately. You can purchase the Inner Arm #910021-65,…

view full answer...

Answer 3

I spoke to my contact at Roadmaster about your Roadmaster Falcon All Terrain Tow Bar part #RM-522 and they informed me that the arm has been overextended which has then caused it to lock out. In order to release the arm you will first want to remove…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will be…

view full answer...

Answer 7

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...