Does Malone AirFlow2 Fit on Rhino-Rack Legs

Question

Question:

Do the Malone airflow 2 crossbars fit Rhino-Rack 2500 Series Legs? I would like to use the Malone crossbars with my existing rhino rack legs.

asked by: Brandon

0

Expert Reply:

No, the crossbars from the Malone AirFlow2 Roof Rack # MPG217 do not fit the Rhino-Rack legs. You'll need to use the legs that come with the # MPG217.

expert reply by: Kyle S

0

Answer 1

The feet and crossbars of roof racks need to stick with the same brand as they are not interchangeable. So if you were wanting to use the Malone 58 inch aero crossbars on the roof of your 2007 Toyota 4Runner you'd need to use the roof rack kit…

view full answer...

Answer 2

Hands down the better option for your 2017 Nissan Pathfinder with raised rails is the Rhino-Rack over the Malone AirFlow2 Roof Rack #MPG216. The Malone is really a more universal type of fit that is an all-in-one with bars that are smaller in…

view full answer...

Answer 3

As seen in the attached photo, the towers on the Malone AirFlow2 Roof Rack - Aero Crossbars 58" #MPG216 and 65" version #MPG217 measure 7" long. I also attached a demonstration video that shows the 58" system being used on a 2019…

view full answer...

Answer 4

We have everything you need to complete the roof rack set up on your Forest River No Boundaries travel trailer, which according to my research has the Rhino-Rack RT-Style Roof Rack Tracks #RRRTV148. Like you mentioned, all you need are the towers and…

view full answer...

Answer 5

We do have a trailer hitch receiver and all the parts you need in order to add a 7-way to your 2021 Toyota Sienna, though there isn't a plug-in 7-way, you will need to first add a 4-way and then install a 7-way. The exact parts you need for your…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does Malone AirFlow2 Fit on Rhino-Rack Legs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching