Replacement Monitor With Color For A Voyager AOM-711 RV Camera System

Question

Question:

I currently own a 2008 Itasca Navion with a Voyger AOM-7111 backup camera. I would like to replace this with a color system that is direct replacement if possible. Please advise best product for this purpose.

asked by: Robert W

0

Expert Reply:

You can replace your Voyager AOM-711 monitor with the Voyager RV LCD Observation Monitor # VO34FR. If you also have an older black and white rear camera then you can also replace it with Voyager Rear Camera # VCMS17B, which will be a direct plug-in for Voyager's connection style.

expert reply by: Kevin C

0

Answer 1

The SAE-P2-A98 that you are referring to is actually tied to different tests that have been done on the light and doesn't reflect the part number of the light itself. We have found that a good number of customers have replaced lights with…

view full answer...

Answer 2

The main difference between the Voyager Rear Camera part VCMS155B and the Voyager Rear Camera part #VCMS17B is that the latter has a smaller viewing angle, 131 degrees compared to the former which has a 155 degree viewing angle. They will both work…

view full answer...

Answer 3

If you have the old first generation system like I'm thinking you have then you can replace the rear camera with part #VGR84VR. You should have a 4-pin CEC connector on your current camera if this is the case and your monitor would not have…

view full answer...

Answer 4

Yes the Voyager RV LCD Observation Monitor part #VO34FR is the exact same as the VOM-718 that you have now so it would work great as an exact replacement.

view full answer...

Answer 5

I just spoke with my rep at Voyager. The replacement monitor for the Voyager AOM 711 is going to be the Voyager RV LCD Observation Monitor - 7" Screen - 3 Video Inputs item #VO34FR.

view full answer...

Answer 6

The connectors of the Voyager RV LCD Observation Monitor - 7" Screen item #VO34FR are the same as the connectors on the older model Voyager AOM-711 RV Backup Monitor.

view full answer...

Answer 7

The #VO344FR monitor you mentioned wouldn't be compatible, the correct replacement would be part #VOM719WP. I've linked you to a product description video. I hope that helps!

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Voyager WiSight Wireless RV Backup Camera System #ASA37YR you were looking at is only compatible with the RV Backup Camera #ASA74YRor #WVH100 so this would need to be the camera you already have installed or you would need to replace the camera.…

view full answer...

Answer 12

We do have what you need, but since your 2022 Winnebago 2529RG is prewired for the Voyager system you will not want to use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR that you were looking at. Because you will…

view full answer...