Bauer RV Door Latch part # BA95FR External Dimensions

Question

Question:

What are the dimensions of the outside frame on this latch and does this latch come in a chrome finish? Thanks

asked by: Jim

0

Expert Reply:

The overall outside dimensions of the Bauer RV latch part # BA95FR that you referenced are 4-7/8" long x 1-3/4" wide x 4-1/2" tall. We do not have a chrome version of this.

expert reply by: Jameson C

0

Answer 1

We have a few options for door latches that might be good replacements for yours. There is the Bauer Products Manger Door Lock for Horse Trailers #BA95FR. This is designed for a vertical oriented door latch. We also have a horizontal opening style.…

view full answer...

Answer 2

The Bauer Products Manger Door Lock #BA95FR cannot be operated from the interior side. I recommend going for the Global Link RV Baggage Door Slam Latch with Keyed Alike Option #295-000002. This will give you entry to both outside and inside of the…

view full answer...

Answer 3

I have another option for you, but the Bauer Products Manger Door Lock for Horse Trailers - Matte Black - Zinc - Left Hand #BA55FR you were looking at cannot be ordered with a specific key code. To get multiple locks with the same code you would need…

view full answer...

Answer 4

Yes, to use the Bauer Products Manger Door Lock for Horse Trailers #BA95FR in a right hand configuration you'd just have to flip the latch so that the locking mechanism is on the right hand side.

view full answer...

Answer 5

The #CHK510 key you mentioned is common to all #L1980, #L1930, #L1883, #L1833, and # L4080 latches. In order to get you the correct key, look on the face of the lock and see if there's a reference number engraved or stamped next to the key slot.…

view full answer...

Answer 6

For your electric jack, there are only three possible explanations for your jack not working with a charged battery. Either power is not getting to your motor, your motor is bad, or your ground connection isn't working properly. To test power,…

view full answer...

Answer 7

I would be happy to help you determine which replacement door latch and strike plate fits your 1998 Titan Angle Haul 3 horse trailer, but unfortunately we do not have a breakdown of the specific components your trailer uses. The Bauer Products Manger…

view full answer...

Answer 8

In order to find a suitable replacement latch for your horse trailer you need to remove the old latch and measure the cutout as that's then going to tell you a compatible replacement. The Bauer Products Manger Door Lock for Horse Trailers part…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…

view full answer...

Answer 12

Hey Eric! Are you wanting to change from disc brakes to electric hub and drums, or are you just wanting to replace the rotors themselves? Traditionally 10" brakes are only compatible with up to 15" wheels but if yours have been working just…

view full answer...

Bauer RV Door Latch part # BA95FR External Dimensions

Product Page this Question was Asked From

Continue Researching