Stromberg Carlson Jack Pads That Fit Equalizer 10 Inch Octagonal Feet

Question

Question:

do you carry the stromberg carlson pads that fit equalizer brand 10inch octagonal feet?

asked by: Raymond C

0

Expert Reply:

We do carry the pads from Stromberg Carlson that fit the Equalizer brand 10 inch octagonal feet; the correct part number is the following:

- Stromberg Carlson RV Jack Pads for Equalizer Systems - 10" Round or Octagonal Jack Feet # SC29MR

expert reply by: Kyle S

0

Answer 1

You will want to measure the overall diameter of your landing gear feet, so you will want to include the "lips" as shown in the accompanying photo. The SnapPad Jack Pads for Class A and C Motorhomes w/ 10" Round and 10" Octagon…

view full answer...

Answer 2

The SnapPad EQ, #SN76FR will fit 10" octagon or concave round jack feet.

view full answer...

Answer 3

The SnapPad EQ Plus Jack Pads #SP64FR84 will work on class A and class C motorhomes with equalizer leveling systems that has 2 octagon jack feet and 2 round jack foot. The SnapPad EQ Octagon Jack Pads #SN76FR will work with class A, B, and C…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 11

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Stromberg Carlson Jack Pads That Fit Equalizer 10 Inch Octagonal Feet

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching