Is The Blue Ox TrackPro Weight Distribution Adjustable For 350-400LBS of Tongue Weight?

Question

Question:

Hello, I was wondering if you could tell me how the weight rating for this hitch BLU36FR is adjustable from 200-600 lbs? I am only dealing with 350-400 pounds and just need a little help keeping things level. I don’t want to over correct for my tongue weight, so I wondered if moving the ball up and down the 7 shank holes is how you adjust the load rating at the tongue. Thanks

asked by: Chris T

0

Expert Reply:

The Spring Bars # BLU82FR for the Blue Ox TrackPro Weight Distribution # BLU36FR is what gives you the tongue weight range of 200-600lbs. The adjustment holes for the ball mount itself are only to help you level the trailer. There are bolt holes on the L-Brackets # BLU72QR for the trailer which will allow you to increase or decrease the amount of tension on the bars. These are typically only ever used in one mounting position. Personally I have never been a fan of the Blue Ox weight distribution and this is one of the reasons why.

The Equal-i-zer Weight Distribution System # EQ37060ET is a much better option and the one I recommend. This includes a 2" ball like the Blue Ox. The big difference is unlike the Blue Ox on the Equal-i-zer you can adjust the angle on the hitch head which will allow you to more customize the amount of tension placed on the bars. While the spring bars for this hitch are also rated for 200-600lbs of tongue weight you can actually adjust the tension which gives you actual adjustability.

expert reply by: Bud M

0

Answer 1

Using spring bars that are overrated for the total tongue weight of your trailer can cause a pretty rough ride but other wise would not actually harm anything. If you notice the rough ride then replacing your spring bars with one that are rated for…

view full answer...

Answer 2

We have quite a few options available for your 2008 Ford F-150 FX4 to pull your new toy hauler. The 1,126 pound tongue weight of said toy hauler will not be an issue at all and I have 3 options listed below. The first one will be a budget option, the…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 7

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 8

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 9

Hey Tom, you are on the right track. I checked out your 2023 Jayco Jay Flight 284 BHS and it does have an underslung coupler so the correct B and W Continuum weight distribution would be the part #BW88FR. An underslung coupler is basically one that…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Absolutely our Tongue Weight Scale #e99044 will work perfectly with your travel trailer! Our scale has a 2,000 lb capacity which you may think that a 5,000 lb trailer would be too much for our scale, but it's actually an ideal size trailer. What…

view full answer...

Answer 12

Accuracy is the most important thing when it comes to tongue weight scales in my opinion and convenience is a plus. The etrailer Tongue Weight Scale #e99044 is both. I have gotten my hands on this product and used it. One of my favorite things about…

view full answer...