Replacement Anchors and Handles for Curt A30 Fifth Wheel Hitch for 2021 GMC Sierra 3500

Question

Question:

I have a 2021 Gmc sierra 3500 with puck system I need replacement handles and anchors for curt A30. Is this the correct part number?

asked by: Jose D

0

Expert Reply:

For your Curt A30 that fits your 2021 GMC Sierra 3500 the correct anchor kit would be the part # C93UR and then for the handles you'd want the part # C33UR and you'd be set.

expert reply by: Jameson C

0

Answer 1

The correct set of replacement Curt A25 anchors just depends on what vehicle you're needing them for! Here are the different options: - Ford Anchors #C98UR - Ram Anchors #C68UR - Chevy/GMC Anchors #C93UR Let me know if you're needing anything…

view full answer...

Answer 2

The king pin dimensions can be the same between fifth wheel trailers and large commercial trailers. Both types of trailers often use a standard 2 inch king pin although semis sometimes have a 3-1/2 inch. As long as your truck fits a 2 inch king pin…

view full answer...

Answer 3

Thanks for the picture of Curt Q25 handles you need. Based on that the correct replacement is the part #C38UR.

view full answer...

Answer 4

From the parts you recently looked at, it looks like you are asking about anchors for a curt fifth-wheel hitch. If you have a 2017 Chevy Silverado 2500, the part that works with a fixed hitch is the Replacement Anchors for Curt 5th Wheel Hitches for…

view full answer...

Answer 5

The correct replacement anchor kit for the Curt GM Fifth Wheel Adapter part #C88KR is the part #C93UR which is the same as the 19210.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The B and W Patriot slider is the only hitch unfortunately that can't be adapted to fit the OEM rails of your 2024 Ram 2500 as none of the adapters can work with it. So Mike what that means is that no matter how you slice it...it's time for a…

view full answer...

Replacement Anchors and Handles for Curt A30 Fifth Wheel Hitch for 2021 GMC Sierra 3500

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching