Can Convert a Ball Cushioned Ball Mount AMSCV-2 be Used with 2-5/16 Hitch Ball

Question

Question:

ITEM # AMSCV-2 Will this accept a 2-5/16 ball? 8,000 pound trailer?

asked by: Richard G

0

Expert Reply:

Yes, the Convert a Ball Cushioned Ball Mount part # AMSCV-2 that you referenced can be used with a 2-5/16 inch hitch ball like the # 19286.

expert reply by: Jameson C

0

Answer 1

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 2

The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 5

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 6

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

view full answer...

Answer 7

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

view full answer...

Answer 8

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR. The…

view full answer...

Answer 9

The etrailer E-Track Backing Plates with Hardware part #e76YR work with any of the etrailer Horizontal E-Tracks like part #e42VR. The track and backing plates allow for up to 2,000 lbs but you'll also be limited by the material you're…

view full answer...

Answer 10

Generally speaking bearing grease has so little water in it that significant expansion due to freezing temperatures is unlikely. Higher operating temperatures within the hubs while underway would potentially thin the grease but again not cause much…

view full answer...

Answer 11

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Can Convert a Ball Cushioned Ball Mount AMSCV-2 be Used with 2-5/16 Hitch Ball

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching