How to Fix Extending Towing Mirrors for 2015 Toyota Tundra

Question

Question:

I purchased the Fit System 70103-04TMirrors from you a year or two ago. The mirrors no longer slide in and out. Is there a way to lubricate the arms so they will slide? Or how can I resolve this? My truck is a 2015 Toyota Tundra. Thank you

asked by: Leslie W

0

Expert Reply:

I checked with K-Source on the K-Source Custom Extendable Towing Mirrors part # KS70103-04T for your 2015 Toyota Tundra but there are unfortunately not any maintenance procedures. I'd recommend using some spray lubricate to free the slide mechanism and then some grease to prevent it from sticking again. If this does not work, best option would be to replace the mirror, part # KS70103T for passenger or part # KS70104T for driver.

expert reply by: Conner L

0

How to Fix Extending Towing Mirrors for 2015 Toyota Tundra
(click to enlarge)

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 5

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Yes, we have the K-Source Universal Towing Mirrors #KS69ZR which will fit your 2024 Toyota Tundra. These towing mirrors are easy to install, has mirror face dimensions of 7-3/4" tall x 5-1/8" wide, and has rubber pads on the straps to avoid…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hello Kendall. The K-Source Universal Towing Mirrors #KS69ZR are going to be your best bet for the 2022 Toyota Tundra Limited. We have double checked with the manufacturer and confirmed that they will fit the Limited models with full chrome or…

view full answer...

How to Fix Extending Towing Mirrors for 2015 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching