Dimensions of Replacement Spring for Ram Sleeve Lock Couplers

Question

Question:

Can you tell me the length of this spring and the coil diameter?

asked by: Shari S

0

Expert Reply:

I took a caliper out to our warehouse and measured the Replacement Spring for Ram Sleeve Lock Couplers part # CA-5196-SPR for you, the length is 1.68" and the diameter of the coil is .040".

expert reply by: Conner L

0

Dimensions of Replacement Spring for Ram Sleeve Lock Couplers
(click to enlarge)

Answer 1

You can replace the lock core for your Sears X-Cargo box with the part #1500004217. This comes with a new lock core and key but you'll also need the Universal Change Key #853-1251 to install the lock core. If your cargo box has 2 cores then…

view full answer...

Answer 2

Thank you for the picture! Although this is a newer style of latch, the Replacement Latch for SportRack Explorer Cargo Box #03347 will work great, and is confirmed to work as a replacement latch for your Sears X-Cargo. ¡Gracias por la foto!…

view full answer...

Answer 3

We don't have a lot of replacement parts for the Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2-5/16 Ball #CA-5296-B that you referenced but we do have the replacement spring part #CA-5196-SPR and the replacement pin…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Dimensions of Replacement Spring for Ram Sleeve Lock Couplers

Product Page this Question was Asked From

Continue Researching