What Size Tail Light Fits The Replacement Fender Light Housing # DM75VR?

Question

Question:

What is the size of the hole for Luke light do they accommodate 4” or 4 1/2” lights

asked by: Noah

0

Expert Reply:

The Replacement Fender Light Housing # DM75VR will accommodate the Replacement 4" Round Tail Light # DM45MV. You will need the Tail Light Grommet # DM25MV or we have the Fender Lighting Repair Kit # DM67VR which includes the light, grommet and wiring.

expert reply by: Bud M

0

Answer 1

What tow dolly do you have? The one shock we have is the part #DM01729-30 for the Demco Kar Kaddy which is 24 inches when fully extended and 14 inches when retracted. The eyelets on either end are 9/16 inch. Hopefully what you have matches that.

view full answer...

Answer 2

The Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14" Wheels - Qty 1#F008554 is a great fender to replace what has broken on your current tow dolly. You can use the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic,…

view full answer...

Answer 3

I was able to find the correct fenders for your Demco Tow-it 2 tow dolly, as the Replacement Fender #DM97FR will not fit your Tow-it 2. Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

What Size Tail Light Fits The Replacement Fender Light Housing # DM75VR?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching