Does the 750 lb Blue Ox SwayPro Weight Distribution System Come with Spring Bars for Other Weights

Question

Question:

Do these WDH systems come with interchangeable bars to pull different tongue weights

asked by: Jason F

0

Expert Reply:

The Blue Ox SwayPro Weight Distribution part # BXW0756 is designed for a trailer with a tongue weight between 550 lbs - 750 lbs. If you have a different tongue weight outside of this range, you'd need to purchase new spring bars for that weight which is the case for almost all weight distribution systems, they don't come with. I have attached these for you below.

2,000 lbs part # BXW4014
1,500 lbs part # BXW4008
1,000 lbs part # BXW4007
750 lbs part # BXW4006 (comes with above)
550 lbs part # BXW4005
350 lbs part # BXW4015

That said, there is one system that can accommodate a much wider range of tongue weights due to the unique design, the B&W Continuum Weight Distribution System part # BW78FR which is rated for 600 lbs - 1,600 lbs of tongue weight.

expert reply by: Conner L

0

Answer 1

The B&W Continuum Weight Distribution System part #BW78FR per B&W, does have built-in sway control. That said, all weight distribution systems have some sway control as they provide friction at the connection point which will then in turn…

view full answer...

Answer 2

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 3

The B&W Continuum Weight Distribution System part #BW78FR for 2" or part #BW28FR for 2.5" is going to be your best option for a toy hauler trailer like a Grand Design Momentum 31G since the tongue weight can vary heavily based on loaded…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 10

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...