Does Speaker Cover Version of Solera Power Awning Head Cover Fit on Idler Head Slip Ring Assembly

Question

Question:

I just ordered part #LC330961 so I can add led lights to the roller of my awning. Can you advise if the cover that has a speaker in it will attach to this part?

asked by: John P

0

Expert Reply:

Yes, the version of the Solera head cover that has the speaker like part # LC354189 will attach to the Lippert Idler Head Slip Ring Assembly # LC330961 that you referenced.

expert reply by: Jameson C

0

Answer 1

Here are the front and back covers for the Solera awning heads that have speakers built in. Replacement Solera Awning Speaker Drive Head Front Cover - Black #LC731463 Solera Power Awning Speaker Drive Head Back Cover, Black #LC300009 Replacement…

view full answer...

Answer 2

We actually do carry the Replacement Slip Ring Assembly #LC330961 that I believe you are talking about. If you are just wanting to replace the entire idler head then you can do so with part #LC334785 which is in the color black.

view full answer...

Answer 3

The part you linked to, #LC334785 does not have a speaker however, the Solera Power Awning Speaker Idler Head is, #LC342150 is available. We also have the Replacement Slip Ring Assembly, #LC330961 to replace the current slip ring assembly in your…

view full answer...

Answer 4

I do have an option for you but the speakers inside of the Solera awning heads are very small so they just don't put out the best quality of sound. The Replacement Solera Awning Speaker Drive Head Front Cover part #LC731463 doesn't…

view full answer...

Answer 5

Most likely the issue is wiring like you mentioned if the one side just stopped working one day. You can remove the cover and you'll see that the speaker is attached to it and there would be two spade connectors from the speaker to the…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Does Speaker Cover Version of Solera Power Awning Head Cover Fit on Idler Head Slip Ring Assembly

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching