What Wheel Bolt Pattern Uses 5 Lugs Spaced 3-1/4 On Center?

Question

Question:

What rim I need to fit my trailer 16 inch 5 lug with 3 1/4 spacing

asked by: Woody

0

Expert Reply:

Your 5 lug spaced 3-1/4" on center is a 5 on 5-1/2" bolt pattern. The largest size wheels we have in that bolt pattern are 15". Currently we only have the Vesper Steel Modular Trailer Wheel # TA37RR. We do also have the Provider ST205/75R15 Radial Trailer Tire w/ 15" White Spoke Wheel # A15R55WS as a wheel and tire package. If you want to keep the 16" diameter wheel we can help you find a new hub with either the 6 on 5-1/2" or 8 on 6-1/2" bolt pattern. I will need some additional information about your axle spindle size to find a replacement hub.

expert reply by: Bud M

0

Answer 1

We have a Taskmaster Silver Vesper wheel #TA37RR that has your 5 on 5-1/2 bolt pattern and A Kenda Karrier tire with a tire size ST205/75R15 #AM10244. These would need to be mounted at a local shop.

view full answer...

Answer 2

view full answer...

Answer 3

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 4

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 10

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 11

I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.

view full answer...

Answer 12

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

view full answer...

What Wheel Bolt Pattern Uses 5 Lugs Spaced 3-1/4 On Center?

Product Page this Question was Asked From

Continue Researching