Can The Shank On a Roadmaster Sterling 6,000LB Tow Bar Be Replaced?

Question

Question:

Will the #910019-40 shank fit my Roadmaster Sterling All Terrain 6000 lb capacity S/N 605108 tow bar? The reason for the question is my towbar yoke bolt P/N is 350191-00 and the new 8000 lb towbar bolt P/N is 350185-10 My bolt is 4-1/8inch long and the 8K bolt is 4.0inch long

asked by: Richard L

0

Expert Reply:

I reached out to Roadmaster and it appears you are going to have to replace your Roadmaster Sterling All Terrain, Non-Binding Tow Bar # RM-576. They no longer have a replacement shank for your 6000lb Sterling as they no longer produce parts for it.

expert reply by: Bud M

0

Answer 1

Yes we have confirmed with Roadmaster that the shank #910019-40 does fit the Roadmaster Sterling models that had a 6k capacity so this would work.

view full answer...

Answer 2

I spoke to my contact at Roadmaster and he informed me that there is no way to adapt your older style Roadmaster tow bar to the new stinger. If yours is still good and you were just looking to replace the stinger as preventative maintenance I would…

view full answer...

Answer 3

It sounds like you're looking for a replacement shank for a Roadmaster Sterling Tow Bar, like #RM-576. If so, the correct part you're looking of is #910019-40.

view full answer...

Answer 4

For your Roadmaster Sterling Tow Bar #RM-576 the replacement stinger part #910019-40 is the correct replacement. The nut is included so if you need a horizontal bolt too you'd also need the part #RM350191-00.

view full answer...

Answer 5

Yes, the Replacement Round Nut #RM650004-80 is designed for all of the Roadmaster tow bars so it will work for your application.

view full answer...

Answer 6

The Blackhawk tow bar part #RM-422 and the Sterling part #RM-576 are both really great options but they have some distinct differences. One being the Blackhawk has a 10k capacity and the Sterling 8k. Both are well above what you'd need so…

view full answer...

Answer 7

What you would need is the part #RM910003-32 for the bolts, the part #RM-200029-10 for the bushing and then for the yoke part #RM910575 and you'd be set. There isn't an entire kit that covers all the parts you need but with these three part…

view full answer...

Answer 8

The Roadmaster Sterling All Terrain Tow Bar part #RM-576 is just simply the newer, updated model of the discontinued Roadmaster Sterling Tow Bar part RM-555. It sounds like you might be looking for replacement parts for one or the other so if that is…

view full answer...

Answer 9

I spoke with my contact at Roadmaster about how to find the serial number to get the proper adapter to use with the Blue Ox base plates. You will need to spread the 2 arms apart on the tow bar and then look for the sticker where the two arms come…

view full answer...

Answer 10

The Complete Repair Kit for Roadmaster Sterling Tow Bar #RM-910003-30 contains (4) Rubber caps (2) Locking springs (2) Retaining rings (2) Shoulder bolts (2) Nylock nuts (14) 1-1/2" Diameter acetyl washers (1) 3/4" Jam nut (4) 3/4"…

view full answer...

Answer 11

The Complete Repair Kit #RM-910003-30 that you referenced comes with everything in the picture I attached. I attached pictures of the installation process for you to check out as well.

view full answer...

Can The Shank On a Roadmaster Sterling 6,000LB Tow Bar Be Replaced?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching