Length of Replacement M6 x 20 T-Bolt for Thule Trail XT Cargo Baskets

Question

Question:

What’s the length of the bolt?

asked by: Ronaldo

0

Expert Reply:

The Replacement M6 x 20 T-Bolt for Thule Trail XT Cargo Baskets part # TH36JV is 20mm or 7/16" long.

expert reply by: Conner L

0

Answer 1

For your ARB brackets, you can use the Replacement M6 x 20 T-Bolt for Thule Trail XT Cargo Baskets #TH36JV which is an M6x20mm T-bolt.

view full answer...

Answer 2

The Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails part #TA01-2100N measures 1-3/4" long x 1" wide x 1/4" thick.

view full answer...

Answer 3

According to Thule, at one time they did the OEM roof racks for BMW/Mini, but that's been several years ago so they can't provide any information on anything more recent than 8 or so years ago. The good news is that I can simply provide you…

view full answer...

Answer 4

Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails - Qty 1 #TA01-2100N has a threaded hole that is 3/8-16.

view full answer...

Answer 5

Yes, the Replacement M8 T-Bolt part #853-5715 will fit properly within the channels on the Thule Evo WingBar Crossbars. If you are looking for the correct Thule Evo WingBar System to use on your 2019 Kia Niro then you will need to obtain either part…

view full answer...

Answer 6

We have exactly what you need, that is the Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers, #753-0783. And FYI, in case needed in the future, we also have the Replacement Hardware Bag #2 for Thule Canyon XT Roof Cargo Basket,…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Length of Replacement M6 x 20 T-Bolt for Thule Trail XT Cargo Baskets

Product Page this Question was Asked From

Continue Researching