Will Titan Pintle Hook Mount RP45294 Fit Buyer's Products Bolt On Receiver BP82FR

Question

Question:

I have a RP45294 for all my other vehicles will that product work in this bolt on receiver?

asked by: Mike K

0

Expert Reply:

Yep!

The Titan # RP45294 you have will fit into the Buyer's Products Bolt On Receiver # BP82FR without a problem.

expert reply by: Samuel C

0

Answer 1

The holes on the Buyer's Products Bolt-On 2-1/2" Hitch Receiver #BP82FR are spread 3-1/2" vertically and 3-3/8" horizontally. And the Buyers Products 15 Ton Combination Pintle Hitch w/ 2-5/16" Ball #BP38FR has the mounting…

view full answer...

Answer 2

I went to our warehouse and measured the Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50 to get the height dimensions. The overall height of the pintle when open is 12" and when closed is 9-1/2". I also took a measurement for…

view full answer...

Answer 3

I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the…

view full answer...

Answer 4

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

view full answer...

Answer 5

The wiring color codes and wire gauge recommendations for the Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, item #PK11700, are listed below. White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge…

view full answer...

Answer 6

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 7

Yes, we can definitely set you up with some Timbrens for the front of your 2023 Ford F-350 4WD. I recommend the Timbren #TFF350SDC. These have a 3,000 lb capacity and will help to keep the truck level when you are plowing. They will also absorb shock…

view full answer...

Answer 8

Some of the newer trailers have a lithium setting for charging lithium batteries, so you will want to check with Winnebago or the equipment owner's manual for your 2021 Winnebago Micro Minnie 1808 FBS to see if there is a lithium battery setting.…

view full answer...

Answer 9

The pin of the Brophy Pintle Hook #BR27FR can not lock the hook in the open position. Is there a reason you'd want ability to do this?

view full answer...

Answer 10

For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…

view full answer...

Answer 11

I had the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500 measured and have a picture with all measurements included. This is indeed rectangular and is typically installed with the longer sides going across the bed area.…

view full answer...

Will Titan Pintle Hook Mount RP45294 Fit Buyer's Products Bolt On Receiver BP82FR

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching