Parts Needed To Replace Suspension On Tandem Axle Utility Trailer For Larger 35" Tires
Question:
Hello, Right now I am running dual 7K axles with 225/75 15s on my standard 18foot utility trailer. I would like to go to an all terrain setup by lifting my trailer and then running 35in tires. I assume I need to have longer springs and possibly a different equalizer to get the separation between axles to allow for the much larger tires. Can you Send me the proper materials list for this modification, help.
asked by: Rick C
Expert Reply:
Here is a list of parts you will need to remove your current suspension and install the larger 35" tires with your current 7,000lb axles.
Tandem-Axle Trailer Hangers # H248 Qty 1
6-Leaf Double-Eye Spring # e64SR Qty 2
MORryde 14-3/4" Shock Absorbing Equalizers # MR34AR Qty 1
MORryde Suspension Upgrade Kit # MR46ZR Qty 1
U-Bolt Kit # CE23003 Qty 1
I have linked one of our help articles below that has additional information about this type of trailer suspension that will help you throgh the process of installing the larger wheels and tires. You will most likely need to have a custom fender manufactured and may need either wheel spacers or custom offset wheels to position the wider tires where they have enough clearance.
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- 7 Inch Long
- CE Smith
more information >
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Painted
- etrailer
more information >
MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 14-3/4 Inch Long
- Tandem Axle
- MORryde
more information >
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 3-1/4 Inch Tall
- Tandem Axle
- Redline
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Article: Where to Position the Trailer Axle?
- Q&A: Suspension Parts Needed for 3,500 lb Tandem Axles and 29-1/2" Hanger Spacing
- Article: How to Raise Your Travel Trailer Height
- Q&A: What is Towing Capacity of 2020 Ram 2500
- Q&A: Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: Trailer Suspension Hanger Kit Spacing for a Tandem Axle Trailer
- Q&A: Do 3,500 lb Trailer Axles and 5,200 lb Axles Use Same Hub/Drums and Brake Assemblies
- Article: Slipper Spring Trailer Suspension System Review
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer