Will Equal-i-zer Weight Distribution Shank Fit Fastway Weight Distribution FA92-00-0600  

To determine the correct shank for your weight distribution hitch, you need to find the rise or drop you need, just like with a standard ball mount. This is only two measurements - first, measure from the ground to the top of your hitch receiver…

To answer your first question, the Fastway e2 Weight Distribution #FA92-00-0600 is compatible with the Curt Weight Distribution Shank #17120. As for being level, it is important to ensure your rig handles correctly; being unlevel will make it quite a…

The shank that comes with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW #FA92-00-0600 is indeed the 4100; it is the following part number: - Fastway e2 Weight Distribution Shank - 12" Long -…

I would be happy to help you fix your Curt Echo item #C51180. First you will need to completely unplug the Echo from both trailer and truck, delete the app from your phone, reinstall the app, and then plug the Echo into the vehicle 7-way (by itself)…

Although you do not have any issues with weight distribution, the best type of sway control we can offer you is in the form of a weight distribution system. For this, I recommend the Fastway e2 Weight Distribution part #FA92-00-0600 which has two…

Based on the weight of the trailer you will be towing with your 2021 Toyota Highlander the correct Fastway E2 weight distribution system would be the part #FA92-00-0600 which has a tongue weight range of 250-600 lbs. The other systems would be rated…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…