Replacement Module for 1800709 of Kwikee RV Step

Question

Question:

I have a Kwikee step with controller 1800709. The steps move in and out properly, but will not stay extended with the coach power off. I used the troubleshooter steps in the information packet from Kwikee and found nothing wrong. Controller issue?

asked by: Eric S

0

Expert Reply:

Is this a new problem or one that has been always there? If new problem I would assume it's a controller like the # LC363989 which is correct for the 1800709 that you have. If the problem has always been there it could also very likely still be module.

expert reply by: Jameson C

0

Answer 1

I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

view full answer...

Answer 2

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 3

The correct step control for you is the Lippert Components Kwikee Step Control with Override and PKD part #LC379605, not the Lippert Components Kwikee 9510 Control for IMGL/9510 Step Control part #LC379146 or the Kwikee Revolution Step Control Module…

view full answer...

Answer 4

According to Lippert, there are two possibilities for the correct control module for your Kwikee Series 32 steps, and the correct one will depend on when the steps were manufactured. If the step assembly was manufactured in or before 2005, then the…

view full answer...

Answer 5

If you are currently using 909510001 then you will need #LC379605. The other one, #LC379146, is for pre-IMGL steps. IMGL stands for integrated motor/gear box/linkage. In October of 2004, Kwikee began shipping steps with an integrated motor/gear…

view full answer...

Answer 6

We do have a direct replacement for your Kwikee Steps 1800709 controller - this is found as the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 on our site. Our part numbers may differ from the manufacturers but I've…

view full answer...

Answer 7

The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606.

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Replacement Module for 1800709 of Kwikee RV Step

Product Page this Question was Asked From

Continue Researching