Is the Weight Capacity of the Vehicle Jack Stands Per Jack or for the Pair

Question

Question:

Im getting conflicting information. Video says each stand has a capacity of 4000#. However, I was told in chat that the total capacity was 4000#.

asked by: Bill M

1

Helpful Expert Reply:

The Vehicle Jack Stands part # PTW41021 have a combined 4,000 lb weight capacity. These are great for cars or light duty trucks and vans but they won't be safe for anything much larger.

expert reply by: Conner L

1

Answer 1

The Curt 70105 base plate, which we refer to as part #C68FR would be compatible with a #RM-520 Falcon 2 tow bar by using a #RM-031 Blue Ox base plate to Roadmaster Tow Bar adapter. Curt base plates are manufactured by Blue Ox, so the adapter would…

view full answer...

Answer 2

Yes, the Curt Custom Base Plate Kit part #C68FR which is a fit for a 2020 Jeep Wrangler will work with Blue Ox Tow Bars like the Blue Ox Alpha 2 Tow Bar part #BX7380 which is what I recommend using.

view full answer...

Answer 3

A 2-Ton jack stand like #PTW41021 would be perfect. The #PTW41021 stands provide between 10-3/4 and 16-3/4 inches of lift that would be ideal for installing the #RAS3611-YHD RoadActive Suspension kit

view full answer...

Answer 4

I have a solution for you. Unfortunately, my contact at FloTool does not recommend using the RhinoRamps Max Vehicle Ramp Set #FT11912MI for changing a tire on a double-axel trailer. However, a great solution would be the Blaylock EZ Jack and Wheel…

view full answer...

Answer 5

The FloTool RhinoRamps Max Vehicle Ramp Set #FT11912MI is rated for 16,000 lbs while the curb weight (unloaded weight) of your 2021 Ram 3500 is between 6,056 lbs to 7,536 lbs so you will have no issues with the weight of your truck on these ramps for…

view full answer...

Answer 6

To lift the tires of your boat trailer off the ground for storage using a set of the 2-Ton Jack Stands #PTW41021 on each side of both your axles will work well for weight distribution, as long as you're also still using the jack on the tongue to…

view full answer...

Answer 7

You definitely can install either just the front or rear set of SumoSprings before the other. They do work best with them installed all around but people all the time will install on either the front or rear axle first and then later add the other…

view full answer...

Answer 8

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 9

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Is the Weight Capacity of the Vehicle Jack Stands Per Jack or for the Pair

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching