Can A MaxxAir MaxxFan Plus 4500K Replace A 4951 KSC Model  

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

The MaxxAir MaxxFan Plus Roof Vent part #MA00-04751KSX will be 3.25 inches over the roof line of your trailer when installed. To ensure proper installation I recommend using the Roof Vent Installation Kit part #344270KITW. This will have all of the…

Based on what you described wanting the MaxxAir MaxxFan part #MA00-04751KSX is your best option. This has a 4 speed fan, a powered lift, and has no thermostat. I attached a review video for this for more info as well.

The correct replacement for your MaxxAir Circuit Board 10-04751ks is the following part: - Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS As for the sensor wires, so long other wires are not damaged, I don't…

Thank you for including the model number of your fan, 04751KS, which was exactly what was needed to find your replacement circuit board. The correct part for your MaxxAir MaxxFan Plus Roof Vent 4751KS is: - Replacement Printed Circuit Board for…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

Good morning, Don. The 3/4" wide butyl tape is exactly what we recommend for installing a roof vent such as the MaxxFan #MA00-07000K. We actually sell a roof vent install kit part #344270KITW that comes with sealant, screws and a 30' roll of…

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.

For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.