Are Curt Adapter Rails For Ram Puck System Compatible With Reese 5th Wheel Hitch

Question

Question:

Will this work with a reese 5th wheel hitch

asked by: Larry G

0

Expert Reply:

Yes, a Reese 5th wheel hitch will work and is compatible with the Adapter Rails for Curt 5th Wheel Hitch - Dodge Ram Towing Prep Package # C29BR.

The # C29BR just gives you what are essentially industry-standard base rails in the form of an adapter, which is why it will work with Reese hitches.

expert reply by: Kyle S

0

Answer 1

The Demco 5th Wheel Rail Adapter for Ram #DM6099 weighs approximately 75-80lbs. the shipping weight is 86 lbs. but it comes with a good amount of packing material. This is one of the lightest rail adapters available. it is lighter than our Reese…

view full answer...

Answer 2

Yes, the Adapter Rails for Curt 5th Wheel Hitch - Dodge Ram Towing Prep Package #C29BR does disassemble into four pieces, in fact it comes in four pieces initially and you put it together. As for the distances, the width side to side (horizontally,…

view full answer...

Answer 3

Yes, there is an auto-slide 5th wheel hitch option that will fit the puck system in your 2022 Ram 2500. - Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV This 5th wheel hitch is made in the USA and will drop into the factory prep system in your…

view full answer...

Answer 4

The Demco Hijacker Autoslide part #DM69GV that you referenced fits directly to the puck system of your 2020 Ram 2500 that has the OEM prep package. There would be no need to use any adapters like the picture frame adapter you mentioned.

view full answer...

Answer 5

Installing the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box #325-GH-8045 would not void the warranty of your camper. While some adapters for fifth wheel hitches do this style is different from them and would not. The ones that…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

The Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package #C16046 will work well with the Roto-Flex pin box. The combination will be a good match for you and this hitch with the specific connection to the factory prep package pucks will make…

view full answer...

Are Curt Adapter Rails For Ram Puck System Compatible With Reese 5th Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching