Trailer Compatibility of Trailer Valet RVR3 Remote-Controlled Trailer Dolly

Question

Question:

Regarding the motorized trailer valet do they make an adaptor to use with 5th wheel trailers?

asked by: Russ H

0

Expert Reply:

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly part # TVRVR3-BB225 has a 3,500 lb weight capacity which is great for most single axle and some tandem axle travel and utility trailers. The valet is not compatible with any trailers larger such as a gooseneck or fifth wheel.

expert reply by: Conner L

0

Answer 1

Yes both of the Trailer Valet Remote-Controlled Trailer Dollies #TVRVR5 and #TVRVR3 have internal brakes that are automatic. What this means is that unless you are intentionally moving them they will not move or roll. The 5 is just as ball mount…

view full answer...

Answer 2

When using the Trailer Valet with a tandem axle trailer it is recommended to use the Trailer Valet Trailer Wheel Dollies #TV56FR under the rear wheels. The dollies will provide you with much better turning radius, as the tires will try and bind up…

view full answer...

Answer 3

The maximum grade for the Trailer Valet Remote-Controlled Trailer Dollies is 5 degrees. The capacity does not change this figure although the higher rated RVR9 part #TVRVR9 will preform better than the RVR3 part #TVRVR3-BB225 with a lighter trailer…

view full answer...

Answer 4

I made a quick diagram for you to check out, but the lowest bolt hole on the Trailer Valet Remote-Controlled Trailer Dolly #TVRVR3 will be at 13-1/2".This means that this will be where the bottom most part of your trailer frame will rest when…

view full answer...

Answer 5

The top of your trailer tongue will be bellow 18". The bracket sits on top of the already 9" tall Trailer Valet RVR3 item #TVRVR3. The bracket is 9" tall with multiple adjustment points built in so you can mount it wherever you need to…

view full answer...

Answer 6

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote - 3,500 lbs #TVRVR3 you referenced has a tongue weight capacity of 350 lbs max. The mounting bracket with attach directly to your trailer tongue and has a quick release cotter…

view full answer...

Answer 7

In order to take your trailer down your driveway I recommend the Trailer Valet RVR5 Remote-Controlled Trailer Dolly - Wireless Remote - 5,500 lbs #TVRVR5. However, you will need to find out the actual slope in order to verify if this will work for…

view full answer...

Answer 8

Since you will be at a campground the best way for you to move an enclosed motorcycle trailer is a dolly and a great option is the Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 because it is a combination jack and dolly that has rubber…

view full answer...

Answer 9

Yes, the Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs, part #TVRVR3-BB225, comes with the 2-5/16" hitch ball and mount. We do sell each of these items, the RVR3 Trailer Dolly and the…

view full answer...

Answer 10

The Bluetooth camera will not connect to your 2022 Chevy Silverado's monitor when using the Furrion Vision S Wireless RV Backup Camera System #FOS05TASF. The #FOS05TASF uses closed Bluetooth which is why it won't work with your Chevy's…

view full answer...

Answer 11

In order to obtain a 2" hitch ball for the Trailer Valet RVR3 Remote-Controlled Trailer Dolly part #TVRVR3-BB225 which comes with a 2-5/16" hitch ball you simply need the Replacement 2" Hitch Ball for Trailer Valet part #TVHB2.

view full answer...

Answer 12

On solid pavement, the Trailer Valet can handle a slope up to 5 degrees, but when going up a grade, the #TVRVR3-BB225 can only be used to push a trailer, not pull it so it wouldn't be suitable for pulling a boat out of the water up a boat ramp.…

view full answer...

Trailer Compatibility of Trailer Valet RVR3 Remote-Controlled Trailer Dolly

Product Page this Question was Asked From

Continue Researching