Correct 4" Offset Gooseneck Hitch Ball for 2022 Toyota Tundra with B&W Turnoverball

Question

Question:

I have this gooseneck kit on my tundra with a 5 1/2 feet would this BWGNXA4585 4 inch extender fit ?

asked by: Adam D

0

Expert Reply:

I spoke to B&W and they recommended using the 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches part # BWGNXA4085 with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BW96FR on a 2022 Toyota Tundra. The 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitch for Toyota Tundra part # BWGNXA4585 was for the previous generation Toyota Tundra which has a shallow hitch pin hole, it's not advised for the new generation.

expert reply by: Conner L

0

Answer 1

Yes, there is a fit for a 2022 Toyota Tundra Hybrid for a gooseneck, which is the option from B&W: - B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW96FR For gooseneck wiring you'll need part #50-97-410.

view full answer...

Answer 2

Yes, I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW96FR for your 2022 Toyota Tundra. This hitch is made in the USA and comes with B&W's lifetime warranty. The hitch ball easily flips inside the hitch for…

view full answer...

Answer 3

While there is a suspension enhancement option that will work with a gooseneck hitch on your 2022 Toyota Tundra, the air bags you asked about will not because they mount in the same location as the hitch brackets. So instead, what you will need to…

view full answer...

Answer 4

Easily the best gooseneck trailer hitch for your 2022 Toyota Tundra is the Turnoverball from B&W, with the correct part for your truck (all bed sizes) being the following - B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW96FR The…

view full answer...

Answer 5

There are two different plugs for the B&W Turnoverball Gooseneck Trailer Hitch, the part #BWGNXA1710 which attaches to the hitch ball assembly and covers the opening in the bed while the hitch ball is in the stowed position and the part…

view full answer...

Answer 6

For B and W Turnoverball gooseneck hitches we have two options for covers for the ball hole. We have the part #BWGNXA1715 which fits an empty socket or the part #BWGNXA1710 which fits the bottom of an inverted ball in the socket.

view full answer...

Answer 7

The Curt Gooseneck Hitch, part #C607-661, you referenced is designed to fit your 2013 Dodge Ram 2500 with a 6 foot bed. The included installation instructions have detailed steps to ensure the hitch is located in the correct location. Here is the…

view full answer...

Answer 8

This is a good question but as long as your trailer is under 20,000 lbs the 4 inch offset hitch ball #BWGNXA4085 would not put any undue stress on the hitch or the truck.

view full answer...

Answer 9

I spoke with a representative of B&W who told me that you should not use the 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches #BWGNXA4085 in reverse to move your trailer forward. The offset ball is only designed to be used…

view full answer...

Answer 10

B and W does offer an offset gooseneck ball for their Turnover hitches that also sits up a bit taller with the part #BWGNXA4085. I attached a picture that shows this ball next to the standard ball and you can see it's noticeably taller. For a…

view full answer...

Answer 11

The Air Lift LoadLifter 5000 Air Helper Springs #AL84JQ will not work with a gooseneck hitch, the B&W Turnoverball #BW96FR that fits your 2022 Toyota Tundra, nor is there a flat bracket that for the kit. There is a single option for suspension…

view full answer...

Answer 12

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

view full answer...

Correct 4" Offset Gooseneck Hitch Ball for 2022 Toyota Tundra with B&W Turnoverball

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching