Hitch Pin/Lock Needed For Demco Channel Tongue Trailer Coupler # DM15931-95
Question:
Will this work with a Demco Item # DM15931-95. Or does the Demco even need a couple pin? Thank you
asked by: Brad
Expert Reply:
For the Demco Channel Tongue Trailer Coupler # DM15931-95 you will need the Coupler Pin # 37201281 to ensure the hitch ball does not come unlatched while towing. You can also use the Lock # e98888 for additional security. The Pin # 37201244 you found only has a usable length of 2-9/16" and you need a minimum of 3" to fit your coupler. Also with the coupler pin opening of 5/16" you will not want to use a 5/16" pin as the pin is more likely to get stuck due to corrosion.
Products Referenced in This Question
Coupler Pin - 1/4" Diameter x 3" Long
- Hitch Pins and Clips
- Snapper Pin
- 3 Inch Long
- 1/4 Inch Diameter
- 3 Inch Span
- JR Products
more information >
Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 21K
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 21000 lbs GTW
- 3 Inch Channel
- Auto Latch
- No Lockout
- Demco
more information >
etrailer Surge Brake Coupler Lock - 3-3/8" Span - 1/4" Diameter - Chrome
- Trailer Tongue Lock
- Latch Lock
- Universal Application Lock
- Keyed Alike
- 3-3/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Coupler Pin - 5/16" Diameter x 2-9/16" Long
- Hitch Pins and Clips
- Snapper Pin
- 2-9/16 Inch Long
- 5/16 Inch Diameter
- 2-9/16 Inch Span
- JR Products
more information >
Continue Researching
- Shop: Demco Trailer Coupler - Cast - Adjustable Channel - eZ-Latch - Silver - 2-5/16" Ball - 21K
- Shop: Coupler Pin w/ Chain - 5/16" Diameter x 2-1/2" Long
- Shop: H-Channel for Enclosed Trailer - 93-1/2" Long x 2" Tall x 1-1/8" Deep - Aluminum
- Shop: Hardware Kit for Demco Adjustable Channel Mount Couplers
- Shop: Coupler Pin - 1/4" Diameter x 3" Long
- Shop: Curt Coupler Safety Pin - 12" Chain - 5/16" Pin - Zinc Finish
- Shop: Demco Trailer Coupler - Cast - Adjustable Channel - eZ-Latch - Zinc - 2-5/16" Ball - 21K
- Search Results: 25580
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: safety chains
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Search Results: trailer jack
- Shop: Gooseneck Hitch
- Video: Choosing the Right Brake Controller
- Search Results: fender
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: equalizer
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Article: Trailer Lighting Requirements
- Video: etrailer Hitch Pin Alignment Collar Review
- Shop: Fifth Wheel Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Hitch Pins and Clips
