bing tracking image
Q & A Icon

How to Test the Wiring on a Jensen AWM975 RV Stereo  

Question:

How do I check the 12V power red #3 on the main radio harness of a AWM 975 with a circuit tester if there are no exposed wires leading from the wiring harness to put the tester on. I’m just a beginner, but would like to learn how to do this to see if the radio is getting 12V power.

1

Helpful Expert Reply:

From what I could find on your Jensen AWM975, the main harness should have terminals. I have included a couple pictures outlining the wiring/pin locations.

You can then use a circuit tester like the Hook Probe Circuit Tester # PTW2993 to test. You can push the tip through the black sleeve to test at the terminal (included picture). Or you can hook the black part over a jacketed wire and the tip will pierce through the wires jacket to test that wire.

expert reply by:
1
Scott S
Hook Probe Circuit Tester Function
Hook Probe Circuit Tester Function
(click to enlarge)
Jensen AWM975 Harness Diagram
Jensen AWM975 Harness Diagram
(click to enlarge)
Jensen AWM975 Wiring Number Diagram
Jensen AWM975 Wiring Number Diagram
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>