How are Install Holes of Jensen Stereo # JWM60A Accessed

Question:

How do you mount the stereo onto the wall. I know you need the 4 screws but how do you get at the holes in the stereo to screw then in.

asked by: Mil

Expert Reply:

There is a trim piece that goes around the sides of the face plate of the Jensen Stereo # JWM60A that you referenced. With it removed you'd have access to the mounting hardware for the stereo. In the attached picture you can see the plates removed and the install holes accessible.

expert reply by: Jameson C

click to enlarge

Jac

4/27/2020

I have the Jensen JWM60a installed in our new Keystone Residence and it was incorrectly wired, so my question is how to REMOVE the face plates in order to get at the wiring??

Chris R.

4/29/2020

The side panels just need to be pried off of the unit. About halfway down each side of the outer panel there is a small notch - you'll use a flat head screwdriver (or something similar) at this notch to pull away the panel.