TorkLift Tie-Down Fits For 2022 Ford F-350 With 6-3/4 Foot Bed

Question

Question:

Hi, We have a 2022 Ford F350 with running boards that are just under the cab and a 6 3/4 bed. We would like to get torklift tie downs. The torklift web site shows model F2022 fitting our truck. The picture on their web site is different from the one on your web site. It does not have the slot for the bolt that holds on the leaf spring. Reading the comments on your web site the DIYers had the most trouble with that part of the installation. My question has the part number F2022 changed? Why the different pictures for the same part? Thank you

asked by: Bill E

0

Expert Reply:

Great idea going with TorkLift tie-downs for your 2022 Ford F-350 as they are the highest quality tie-downs for your truck. The specific tie-downs for your truck have not changed, and while I can't fully speak for TorkLift, I believe they have just generic tie-down photos.

The slot for the bolt is still there, and is the most difficult part of the install. In fact, TorkLift calls this out in the first step of the instructions, saying, "Loosen the forward leaf spring hanger nut on each side of the truck. The bolt is extremely tight; it may be necessary to use an impact gun or have a qualified shop loosen the nuts." You are correct about the part number for your '22 F-350, with the front and rear tie-downs being the following:

- TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2022

- TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3008

And just in the interest of being thorough, you will also need turnbuckles, and for that the best option by far are the TorkLift Locking FastGun Turnbuckles. These turnbuckles are the easiest to use due to their lever-action handles, and are also locking to help protect your investment. They come in a quantity of four and you can choose from different colors:

- Polished Stainless Steel: TorkLift Locking FastGun Turnbuckles # TLS9526-2-LK
- Black: TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK
- Gray: TorkLift Locking FastGun Turnbuckles # TLS9522-2-LK

expert reply by: Kyle S

0

Answer 1

I reached out to TorkLift and they told me that while the FastGun turnbuckles do not have a specific weight capacity in regards to the camper, they are designed to hold down a camper at the anchor point with 300 lbs of pull-down force per turnbuckle…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

Yes, they are if your axles are overslung and the springs sit on top of them. The SumoSprings Trailer Helper Springs for 5-8K Axles item #SS26MV will work with a triple axle set up. They do a great job of absorbing road shock while also working to…

view full answer...

Answer 6

The 2022 and 2023 models of the Ford F-350 do both use the same TorkLift camper tie-downs. For your 6-3/4' bed you would need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2022 and rear #TLF3008. If you wanted the aluminum and…

view full answer...

Answer 7

From the top of the bracket to the bottom of the rubber spring the #TFR350SDJ Timbrens measure about 7-1/2 inches. When installed you ideally want about a 1/2 inch to an inch of space between the Timbren and its contact point. However, to install…

view full answer...

Answer 8

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 9

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

TorkLift Tie-Down Fits For 2022 Ford F-350 With 6-3/4 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching