Replacement Fender for Karavan Boat Trailer US-2800-74

Question

Question:

I have a Karavan boat trailer p/n US-2800-74. Im looking to replace the fenders and according to the BOM the part numbers are 310-01217 210001218. Do you have a this part or a direct replacement?

asked by: Jose T

1

Helpful Expert Reply:

I looked up the fender part number you mentioned and while the info was pretty limited I was able to determine that the Fulton fenders part # F008574-2 would be a suitable replacement and would work great.

expert reply by: Jameson C

1

Answer 1

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 2

I did some research and found that the Erickson O-Track Cargo Control System like part #EM59133 is very similar to the L-Track systems you referenced. The Erickson O-Track is 18 inches long and includes 2 Spring-loaded O-ring clips and mounting…

view full answer...

Answer 3

Yes, the direct replacement for your Titan 225S passenger's side brake caliper is the #K71-773-02. For the driver's side use part #K71-773-01. These brake calipers are compatible with 3,500 lb axles with 10 inch brakes, which according to…

view full answer...

Answer 4

The best option I have to replace the fender on a boat trailer with 13" wheels is the Fulton Single Axle Trailer Fender part #F008573. In regards to installation, it's going to take some modifications to either the fender or mounting bracket…

view full answer...

Answer 5

Trailer fenders are sized according to the diameter of the trailer wheels. The Fulton #F008543 fenders you'd looked at are for a 13 inch wheel, so I'll assume that's what you have. If your wheel diameter is different, let me know. I'd…

view full answer...

Answer 6

The side and/or VIN of the trailer is not required. The Fulton fender #F008574 can be fitted on either side of the trailer. And since it is a universal application it does not matter what the trailer make and model is. What does matter are the fender…

view full answer...

Answer 7

The Fulton Single Axle Trailer Fenders #F008595-2 are going to be the closest fenders in size and design to the EZ Loader 250-023712-11 fenders you are looking for. These fenders are 10-1/4" wide x 45" long x 14-7/8" tall while the EZ…

view full answer...

Answer 8

The Galvanized Steel, L-Shaped, Bolt-On Bracket for Plastic, Single-Axle Trailer Fender PF775X21W Item #PF775-BKT is 7-1/2 inches by 4 inches and the Mounting Bracket for Trailer Fender - 8" and 12" Wheels - Galvanized Steel - Qty 1…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Replacement Fender for Karavan Boat Trailer US-2800-74

Product Page this Question was Asked From

Continue Researching