Rhino Rack Roof Rack with Tracks that Fits 2007 Chevy with Leer Camper Shell

Question

Question:

Rhino rack for 07 Chevy 8’ leer 100r?

asked by: Michael

0

Expert Reply:

The Rhino Rack Heavy Duty Roof Rack for Camper Shells part # Y01-130 that you referenced would be a great option for the Leer camper shell on your truck. The bars are the HD style that are 59 inches long and the tracks are 63 inches.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack is a great choice to add a rack system to your camper, and while the square Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells #Y01-130B has its uses, when it comes to using the rack for accessories and/or a tent, the best option is…

view full answer...

Answer 2

The Rhino-Rack Roof Rack System w/ 2 Heavy-Duty Square Crossbars - Track Mount - Black - 59" Long #Y01-130B is the exact same product you will find on the Rhino-Rack website. It will use the same legs #RRRLT600 and will use the same heavy duty…

view full answer...

Answer 3

For your 2015 Ford F-250 I recommend going with the longer Rhino-Rack Roof Rack System #Y02-500B that includes 65 inch crossbars. These bars will reach across the width of your Ford's bed and also provide just a bit of overhang to better…

view full answer...

Answer 4

The Rhino-Rack Roof Rack System #Y01-130B comes with two heavy-duty crossbars and the tracks to attach to the camper. The included tracks are 63-inches long and the crossbars are 59-inches long and measure 1-5/8 inches wide and 1-7/8 inches tall. The…

view full answer...

Answer 5

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Rhino Rack Roof Rack with Tracks that Fits 2007 Chevy with Leer Camper Shell

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching