Trailer Hitch and Wiring Recommendation for 2014 Subaru Outback

Question

Question:

I have a 2014 subaru outback 3.6R, please direct to the best class lll hitch, to be used for a bike rack to a 8 x10 flat bed trailer, for motorcycles or a small side x side, and wiring kit thanks Pete Buell

asked by: Peter B

1

Helpful Expert Reply:

The Curt Class III hitch part # C13410 is the best option for your 2014 Subaru Outback Wagon for carrying a bike rack or towing a trailer. It has more towing capacity than your vehicle will need, is made in the USA, and is mostly hidden which looks nicer and also helps with ground clearance.

Then for trailer wiring the Tekonsha kit part # 118467 is best option as it's most reliable and installs very easily.

expert reply by: Jameson C

1

Answer 1

We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific custom harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 9

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an easy…

view full answer...

Answer 10

The etrailer axle part #e82GR can only be installed in an underslung orientation. Since the axle has a bow to it if you were to flip it the alignment would be way off. You'd have to weld spring seats on the opposite side of the axle with the part…

view full answer...

Answer 11

Since the Torflex number 9 axle is a 2,000 lb capacity axle and I was able to determine that your Little Guy Meerkat Trailer has wheels that have a 5 on 4-1/2 inch bolt pattern the correct hub/drums you'd need to add brakes would be the Dexter…

view full answer...

Answer 12

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Trailer Hitch and Wiring Recommendation for 2014 Subaru Outback

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching