Replacement Wheel Strap For RockyMounts BackStage Bike Rack

Question

Question:

Hi, does this work with the BackStage rack? 853-7006 Thanks!

asked by: Jason

0

Expert Reply:

We do have the replacement wheel strap you need, but the one you referenced is for a Thule rack and will not work with the RockyMounts BackStage Bike Rack # RKY10002.

Instead, the correct part is the Replacement Wheel Strap for RockyMounts BackStage or MonoRail Bike Racks # RKY12391.

expert reply by: Kyle S

0

Answer 1

As of right now there aren't any bike racks which work like that so your best solution is to use a frame hitch mount bike rack an adapter bar like part #TH982XT for the Townie 5i and then the Thule Carbon Bike Frame Protector #TH984101 for…

view full answer...

Answer 2

I can definitely help eliminate some of the confusion. I believe you are talking about the T-handle that rests on the outside of the center mast of the RockyMounts BackStage - 2" #RKY10002. This handle controls the tilt/stow mechanism on…

view full answer...

Answer 3

Generally, we don't recommend using wheel-mount carriers like the RockyMounts Backstage, part #RKY10002 with bikes that have fenders, as it can bend and damage the fender. Instead, I'd recommend a frame mount like the Hollywood Racks…

view full answer...

Answer 4

The best solution is to purchase the Swagman Bike Frame Adapter Bar for Electric, Step Through, and Cruiser Bikes #S57FR for the non-electric women's bike and any electric bike that has a step-through or alternative frame. The adapter bar…

view full answer...

Answer 5

For e-bikes with fenders you will need a bike rack that has a higher weight capacity and also a frame clamp design that can attach to the lower and alternative frames of them like the Hollywood Racks RV Rider part #HLY64FR which would work great…

view full answer...

Answer 6

For what you need the Hollywood Racks Sport Rider SE 2-Bike Carrier for Electric Bicycles #HLY84FR will be the correct solution. This rack is designed for electric bikes like what you have and would work well with your bikes that have fenders since…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

Good morning Brenda. We do offer a trailer hitch for your 2016 Subaru Forester PZEV. The Draw-Tite #DT82MR is not the correct hitch though. That one is only for a 2010 or 2011 Volkswagen Amarok. Instead I recommend the Curt Class 3 Hitch #C13144…

view full answer...

Replacement Wheel Strap For RockyMounts BackStage Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching