Demco 5th Wheel Hitch That Works With A 2022 Chevrolet Silverado 2500 W/ A Short Bed

Question

Question:

Will this hitch fit a 2022 2500hd chevrolet with short bed

asked by: Steven

0

Expert Reply:

In order for the Demco UMS Double Pivot 5th Wheel Trailer Hitch to fit your 2022 Chevrolet Silverado 2500 you would need the Underbed Rail and Installation Kit for Demco UMS 5th Wheel and Gooseneck Trailer Hitches # DM8551010, however Demco does not have a kit that is available that fits your 2022 Chevrolet Silverado 2500.

Instead, I recommend checking out the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550035 with the base rails # DM39FR.

This hitch has the same maximum towing capacity of 21,000-lbs like the Demco UMS Hitch you're interested in, is designed for short bed trucks, and offers 14" of travel from front top back.

Attached is a review video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

If neither truck has the puck system that would mean the Demco Hijacker is one designed for above bed rails which means you'd only need a set of above bed rails installed in your 2020 Chevy Silverado 2500 like the #DM39FR and you'd be set.

view full answer...

Answer 2

Yes the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover - Aluminum - Black Item #PE46CV is confirmed to fit your 2021 Chevrolet Silverado 3500 with the 6-3/4' bed, which is equivalent to your measurements of 82.2". This is…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...