Rubber Truck Bed Mat for 2021 Ram 1500 5-1/2 ft Bed with Ram Boxes

Question

Question:

etrailer Team I have a 2021 RAM 1500 with a 57inch bed with RAM Boxes, hence the bed is 57inch x 48. The bed also has a sprayed in bed liner. I would like to install a rubber mat, as the bed surface is extremely tough on softer items like luggage and or canvas bags as well as my knees. Do you have a recommendation? Thanks for your assistance.

asked by: Stephen A

0

Expert Reply:

For a rubber bed mat that fits your 2021 Ram 1500 5-1/2 foot bed with Ram Boxes we have the DeeZee truck bed mat part # DZ87015 as a confirmed fit that would work well. It does require some trimming to fit with the Ram Box according to DeeZee.

expert reply by: Jameson C

0

Answer 1

I attached a picture that shows the DeeZee truck bed mat #DZ87015 installed in a similar 2019 Ram 1500 as yours. You can see that it matches the contours of the truck bed well and the only trimming is at the front of the mat and for gooseneck hitch…

view full answer...

Answer 2

The Access Custom Truck Bed Mat - Snap-In Bed Floor Cover part #A25040239 that you asked about is designed to work with the new body style Ram 1500. For a second option you can use DeeZee Custom-Fit Truck Bed Mat part #DZ87015. This mat is also a…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Mike I checked with Westin and I can confirm that the Westin HDX Xtreme Nerf Bars item #W45XV do indeed fit the 2021 Ram 1500 Quad Cab. The instructions on their website say crew cab as well. This is pretty common amongst aftermarket part…

view full answer...

Answer 5

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 10

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Rubber Truck Bed Mat for 2021 Ram 1500 5-1/2 ft Bed with Ram Boxes

Product Page this Question was Asked From

Continue Researching