Do I Need Spacers With the Timbren # T76FR Jounce Springs On a 2022 Jeep Gladiator?
Question:
Have a 2022 Jeep Gladiator Rubicon. Will I need any of the 1inch spacers? There is ~7 1/4inch between the top of the cup that holds the stock jounce bumper and the flat pad on the axle housing where the jounce bumper makes contact.
asked by: Philip
Expert Reply:
I reached out to Timbren as I do not have one of the Timbren Springs # T76FR in my warehouse to physically measure. They informed me you will need to measure from the bottom of the cup on your 2022 Jeep Gladiator. The portion that fits inside the cup will hang down 3/16" while the spring is 3-3/4". This will place the bottom of the spring 3-15/16" below the cup. The kit does include a 1/2" spacer which will lower it to 4-7/16" below the cup. Timbren recommends 1/2" to 1-1/2" gap between the bottom of the spring and the jounce pad when installed to ensure ride quality is not diminished when unloaded. That will give you a measurement range of 4-15/16" to 5-15/16" it will fit with the included 1/2" spacer.
We do have additional 1/2" Spacers # TA25722-90P00 and 1" Spacers # A25723-90AH00 if they are needed to achieve the desired height for the Timbren spring. Do note the kit only includes a 3-1/2" and 4" long grade 5, 3/8" bolt so you may need to source a longer bolt locally to fit with additional spacers.
Products Referenced in This Question
Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing
- Accessories and Parts
- Vehicle Suspension
- Spacers
- Timbren
more information >
Timbren 1/2" Spacer for Raised Frame Vehicles
- Accessories and Parts
- Vehicle Suspension
- Spacers
- Lift Spacers
- Timbren
more information >
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Light Duty
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Suspension Enhancement
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door
- Video: Review of Timbren Vehicle Suspension - Rear Axle Suspension Enhancement - T76FR
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing
- Video: ProPride 3P Weight Distribution Hitch with Sway Control Review PR37QR
- Video: Review of ProPride Weight Distribution Hitch - 14K WD/ Sway Control for 2 Inch Receivers - PR97QR
- Shop: Trailer Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: 7-Way Vehicle Power Adapter for Furrion RV Observation Camera
- Shop: Timbren Rear Suspension Enhancement System
- Shop: ProPride 3P Weight Distribution Hitch w/ Sway Control for 2" Receivers - 14K GTW, 1.4K TW
- Video: Furrion RV Tankless Water Heater Installation - 2016 Forest River Wildwood X-Lite Travel Trailer
- Q&A: What Timbren System do You Recommend for My 2022 Jeep Gladiator?
- Search Results: air bags
- Shop: Towing Mirrors
- Search Results: sumo
- Q&A: Timbren Kit for 2021 Jeep Gladiator and Spacers to Use for 4 inch Lift
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Video: Timbren Front or Rear Suspension Enhancement Installation - 2023 Jeep Gladiator
- Q&A: How to Adapt Timbren Rear-Axle Jounce Springs for Vehicles with 2-inches of Lift
- Video: Timbren Rear Suspension Enhancement Installation - 2023 Jeep Gladiator
- Search Results: coil rite
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer brake controller
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
on Vehicle Suspension
