Does ProPride 3P Weight Distribution Hitch Require Professional Installation

Question

Question:

Do the propride hitches need to be professionally installed? Or can we do it ourselves?

asked by: William V

1

Helpful Expert Reply:

You can definitely perform the installation of the ProPride 3P Weight Distribution Hitch # PR57QR yourself. In addition to the written instructions it comes with, we have several installation videos you can follow to make it easier. I recommend checking out the attached videos to see what the process is like. If you decide you would rather have a professional handle it I also included a link to help you find local installers.

expert reply by: Robin H

1

Answer 1

I had the chance to ask this question to ProPride when they came to show us their weight distribution systems recently and they said that the weight of their systems like the part #PR57QR does not end up counting as additional tongue weight as it…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 4

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 5

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 6

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

view full answer...

Answer 7

Installing ta Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like the #325-GH-8045 would not void the warranty of your camper, and Gen-Y makes some of the most durable parts on the market. I really like this as an alternative to…

view full answer...

Does ProPride 3P Weight Distribution Hitch Require Professional Installation

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching