What Model Number is The 190 Watt Go Power Overlander Expansion Kit

Question

Question:

model number on overlander E190 panel? My current Go Power 190 watt panel is model GP-PV-190M I would like another to match this model and its specs

asked by: James H

0

Expert Reply:

I checked directly with Go Power for you, and the model number is indeed GP-PV-190M for the solar panel in the Overlander expansion kit you asked about:

- Go Power Overlander Expansion Kit - 190 Watt Solar Panel # 34282182

So it is the exact same 190 watt panel as you have now.

expert reply by: Kyle S

0

Answer 1

The Go Power Extreme kit part #34282185 uses like a modular connection that allows to easily add more panels as basically you would just attach an additional connector and that's all you'd need to do. The part #GP22VR is a three panel setup…

view full answer...

Answer 2

I contacted the manufacturer to confirm that the Go Power Overlander Expansion Kit #34282182 could be added to your Go Power 170W panel on your RV with the GP-PWN-30 controller. They were able to inform me that you could add up to 2 of the Go Power…

view full answer...

Answer 3

Solar panels are designed to work with specific systems, and they can be added so long as you have a certain set-up. What we offer are Go Power panels, and the closest we carry to 200 watts is the Go Power Overlander Expansion Kit - 190 Watt Solar…

view full answer...

Answer 4

Yes you'd easily be safe to add another Go Power Overlander Expansion Kit #34282182 to your GoPower setup that has a 30 amp controller. You'd be close to the max amperage but you'd be under the 30 amps pretty easily even if they were at…

view full answer...

Answer 5

The Go Power Solar Panels that we offer such as the Go Power Overlander Solar Charging System with Digital Solar Controller part #34282181 are linked together using MC4 cables. These cables are available using the Go Power MC4 Output Cable with Male…

view full answer...

Answer 6

Yes, since you already have two Go Power Overlander Expansion Kit #34282182, you will need to add the MC4 expansion branch connectors #GP22VR and #GP82VR, as well as some extension cables to be able to add a third panel. You should also verify that…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

It really is going to depend on the demands you put on your battery. The 125 amp hour capacity of your battery is a great storage solution so your goal will be to put back into the battery what you are taking out of it. Take the Go Power Weekender…

view full answer...

Answer 9

Hey Don; good question and no other parts - including any type of adapter plate or mounting plate - is needed to mount the 30 Amp Go Power PWM Solar Charge Controller with Bluetooth #GP76QR. The #GP76QR comes with screws and is ready to be mounted…

view full answer...

Answer 10

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 11

Hi Donald, Yes, a higher amperage charger, like the #GP76QR (30 amp), would be able to provide a faster recharge for your battery bank than a 10 amp controller like the #34280503. When adding in the second battery you'll want to wire it in…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...