Will Thule Roof Cargo Boxes Fit on Rhino Rack RVP Roof Rack

Question

Question:

Hello, If I purschase part #RR77QJ what roof rack is compatible whether its Thule, Yakima or another brand? Thank you,

asked by: Dave H

1

Helpful Expert Reply:

The Rhino Rack RVP Roof Rack part # RR77QJ that you referenced is compatible with all aftermarket roof racks and cargo boxes such as the Thule Force XT L part # TH6357B which can carry up to 16 cubic feet of gear. The Rhino Rack crossbars are standard in shape and size so all boxes are going to fit. It also has channels on top of the bars for attaching to accessories as well.

expert reply by: Jameson C

1

Answer 1

I spoke with Thule, and they informed me that your Thule Frontier TH668TT cargo carrier is not able to be converted to be compatible with the EasySnap Mounting System. I know you aren't exactly a fan of the metal mounting hardware #SR04952…

view full answer...

Answer 2

While I can't recommend trying to cook a burger on the Camco RV Portable Propane Campfire w/ Storage Bag, Regulator, and 8' Long Hose #CAM58041 it would be ideal for hot dogs and marshmallows for smores.

view full answer...

Answer 3

Your older style Thule Hullavator is designed to fit Thule Aeroblade bars but it mounts to them in the channels that are on top of the bars and not by wrapping around them. The bolts needed are part #919061654 which then thread to the square nut…

view full answer...

Answer 4

Yes, I have attached some photos for you of the Curt Trailer Hitch Receiver part #C13394 installed on a 2019 Lexus RX 350L. The Curt Trailer Hitch Receiver has a hidden design so that only the receiver tube is shown and it is almost flush with the…

view full answer...

Answer 5

I can certainly help you pick out the biggest roof cargo box that fits your 2017 Kia Sorento with factory crossbars but I'll need to know the distance from the center of the front crossbar back to the rear hatch seam to do that. For example…

view full answer...

Answer 6

Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part #RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as…

view full answer...

Answer 7

You can easily add a Rhino-Rack Pioneer Platform to the Rhino-Rack Vortex Aero Crossbars #RRVA150S-2 or #RRVA150B-2 on your Jeep Wrangler 4xe. All you need is the Pioneer that mounts directly to crossbars, which is the following: - Rhino-Rack…

view full answer...

Answer 8

From the looks of your order, you purchased the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" #Y02-490B-NT. For your ARE MX topper to use the feet from that system, Rhino-Rack recommends the Rhino-Rack…

view full answer...

Answer 9

The 60" x 56" Rhino-Rack Pioneer Platform #RR42113BF actually isn't designed to attach to roof rack crossbars, but instead mounts directly to a vehicle-specific fit kit. There isn't a separate kit available that…

view full answer...

Answer 10

I went ahead and confirmed that the dimensions for the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount #RTC14 are 2" wide x 1/2" tall x 55" long. If you need the crossbars and legs to mount onto the RTC-Style tracks,…

view full answer...

Answer 11

You could trim the Rhino-Rack roof rack tracks #RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set…

view full answer...

Answer 12

There is not a product we carry that has an integrated cable inside the tie-down. I recommed the Rhino-Rack Cam Buckle Cinch Straps - Locking - 11-1/2' Long x 1" Wide - 496 lbs - Qty 2 #RRRTD35L which is a locking strap for…

view full answer...

Will Thule Roof Cargo Boxes Fit on Rhino Rack RVP Roof Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching