Steering Stabilizer For 2022 Georgetown GT5 34M on Ford F-53 Chassis

Question

Question:

Is steering stabilizer the same as axle stabilizer?

asked by: Rodrigo L

1

Helpful Expert Reply:

Somewhat, though axle stabilizers are really not something used much anymore; for example, there are none that fit your 2022 Georgetown GT5 34M on the Ford F-53 chassis. Axle stabilizers help (somewhat) with keeping side-to-side movement at bay, but only after it started.

The steering stabilizer for your motorhome is going to proactively prevent movement with its spring to keep your steering centered - and much easier to control - at all times. A steering stabilizer is a much better overall option for motorhomes, and I verified with Roadmaster the correct fit for your 2022 Georgetown GT5 34M is the following part number:

- Roadmaster Exact Center Steering Stabilizer # RM82RR

expert reply by: Kyle S

1

Answer 1

We do have the correct steering stabilizer for your motorhome on a 2022 Ford F-53 chassis, and the correct one will depend on your rig's GVWR, so I'll list the options for you below. - 16,000 lb, 18,000 lb, & 20,500 lb GVWR: Roadmaster…

view full answer...

Answer 2

For your 2021 Ford F-53 Chassis motorhome with a 24000lb GVWR I recommend the Sumo Springs Rebel Custom Helper Springs #SSF-173-40-2 for the front which have a 3000lb load leveling capacity. For the rear you will need the Sumo Springs #SSR-183-54-1…

view full answer...

Answer 3

Let me see what I can figure out for you, I have the solution linked below: **SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-173-40-2. There was a generation change in the F-53 chassis, Ford changed the motor to the 7.3L V8. When…

view full answer...

Answer 4

The quickest way to solve this issue would be to simply loosen the u-bolts that hole the Roadmaster Exact Center Steering Stabilizer #RM82RR to the tie-rod of your motorhome and let the bracket move to a natural position so that it's not pulling…

view full answer...

Answer 5

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 6

Smart idea to go with a steering stabilizer for your 2023 Thor Luminate to help firm up the steering, and for your motorhome on the Ford F-53 chassis and a 22,000 lb GVWR the correct fit is the following: - Roadmaster Exact Center Steering Stabilizer…

view full answer...

Answer 7

From my available research on your 2021 Georgetown 36b5 motorhome, it has a Ford F-53 chassis and has a gross vehicle weight rating of 22,000 pounds. Unfortunately, for this particular model, we do not have a steering stabilizer available for your…

view full answer...

Answer 8

You can easily determine if you'll need the #RM-590050-10 Extended U-bolt kit by taking a quick measurement. Measure the length of the existing U-bolt that extends through the factory nut. If you can add a 1/2 inch to account for the thickness of…

view full answer...

Answer 9

You're on the money with what you need to improve the handling of your 2022 Fleetwood Bounder 33C motorhome. Big rigs like yours (which is on a Ford F53 chassis) can be very taxing due to how hard you have to work to keep it in line, so the best…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...